www.kaniwaba.com How to install the KANIWABA Power Pedal Kit V3.0. Carefully designed Pedal Kit for the SurRon. What YOU get: - Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! - This pedal kit will propel your ebike IF you add the Power Kit Add-on for Pedal Kits V3.0 or Electronic Pedal Assist Kit Add-on for Pedal Kits - A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! - Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. - Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! - Maintenance free. New design is maintenance free since it has sealed cartridge bearings. - Brace bar. Also works as a brace bar - Reduced wobble. No wobble, a common problem with the OEM kit. - Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. - Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. - Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

- www.kaniwaba.com How to install the KANIWABA Pedal Kit V3.0! Carefully designed Pedal Kit for the SurRon. What YOU get: The Pedal Kit V3.0 plus the Power Kit Add-on for Pedal Kits V3.0. - Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! - This pedal kit WILL propel your ebike. You get a carefully designed split sprocket to install on the jackshaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, and a 34 link bicycle chain with master link so you can easily install on uninstall! - Add the Electronic Pedal Kit for faster speed when pedaling. - A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! - Compatible with chain or belt drives - Chain guard must be removed - Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. - Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! - Maintenance free. New design is maintenance free since it has sealed cartridge bearings. - Brace bar. Also works as a brace bar - Reduced wobble. Little to no wobble of the chain and improved in this V3.0, since it is not connected to the main drive chain, a common problem with the OEM kit. - Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. - Aluminium made in order to reduce weight. With a weight of around 4.3 Lb (2.0 kg). The spindle is made of stainless steel. - Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.

www.kaniwaba.com New electronic pedal kit to add to the Kaniwaba Pedal or Power Kit to propel your SuRon or Segway!

You can buy or know more at: www.kaniwaba.com Here you can see how the Electronic Pedal Assist Kit works in combination with our Pedal Kit or Power Pedal Kit! Carefully designed Electronic Pedal Assist Kit for our Pedal Kits for the SurRon or Segway X. What YOU get: - In the BOX: 3 position handlebar switch, cadence sensor and electronic controller. - This kit, when added to KANIWABA Pedal Kit or Power Pedal Kit, WILL propel your ebike. You get a carefully designed plug and play system which connects to the cable coming from the throttle and to the one receiving the throttle signal. - Cadence sensor to detect pedal speed. - Three Position Handlebar Switch: Throttle only, pedals only or greater speed between pedals and throttle, the system will compare and transmit to the controller the higher speed. - Compatible with ALL Kaniwaba Pedal Kit and Power Pedal Kit Versions - Compatible with chain or belt drives - Durable Materials. Water proof switch, cadence sensor, connectors and control box. - Speed Control. It will propel your ebike to 25 mph max* to comply with regulations. It will pedal reach more speed if used in SPORT Mode. - OEM Look. Discrete installation, all cables hidden! - Propels the bike using the bike's battery. * 25 miles per hour (39 Km per hour) Max speed is in EP Mode, with 48 Teeth sprocket, original X- wave controller, and flat road. With SPORT Mode speed can reach up to 60 Km/h (38 mph).

You can buy or know more at: www.kaniwaba.com Here you can see how the Electronic Pedal Assist Kit works in combination with our Pedal Kit or Power Pedal Kit! Carefully designed Electronic Pedal Assist Kit for our Pedal Kits for the SurRon or Segway X. What YOU get: - In the BOX: 3 position handlebar switch, cadence sensor and electronic controller. - This kit, when added to KANIWABA Pedal Kit or Power Pedal Kit, WILL propel your ebike. You get a carefully designed plug and play system which connects to the cable coming from the throttle and to the one receiving the throttle signal. - Cadence sensor to detect pedal speed. - Three Position Handlebar Switch: Throttle only, pedals only or greater speed between pedals and throttle, the system will compare and transmit to the controller the higher speed. - Compatible with ALL Kaniwaba Pedal Kit and Power Pedal Kit Versions - Compatible with chain or belt drives - Durable Materials. Water proof switch, cadence sensor, connectors and control box. - Speed Control. It will propel your ebike to 25 mph max* to comply with regulations. It will pedal reach more speed if used in SPORT Mode. - OEM Look. Discrete installation, all cables hidden! - Propels the bike using the bike's battery. * 25 miles per hour (39 Km per hour) Max speed is in EP Mode, with 48 Teeth sprocket, original X- wave controller, and flat road. With SPORT Mode speed can reach up to 60 Km/h (38 mph).

www.kaniwaba.com Carefully designed Electronic Pedal Assist Kit for our Pedal Kits for the SurRon or Segway X. What YOU get: - In the BOX: 3 position handlebar switch, cadence sensor and electronic controller. - This kit, when added to KANIWABA Pedal Kit or Power Pedal Kit, WILL propel your ebike. You get a carefully designed plug and play system which connects to the cable coming from the throttle and to the one receiving the throttle signal. - Cadence sensor to detect pedal speed. - Three Position Handlebar Switch: Throttle only, pedals only or greater speed between pedals and throttle, the system will compare and transmit to the controller the higher speed. - Compatible with ALL Kaniwaba Pedal Kit and Power Pedal Kit Versions - Compatible with chain or belt drives - Durable Materials. Water proof switch, cadence sensor, connectors and control box. - Speed Control. It will propel your ebike to 25 mph max* to comply with regulations. It will pedal reach more speed if used in SPORT Mode. - OEM Look. Discrete installation, all cables hidden! - Propels the bike using the bike's battery. * 25 miles per hour (39 Km per hour) Max speed is in EP Mode, with 48 Teeth sprocket, original X- wave controller, and flat road. With SPORT Mode speed can reach up to 60 Km/h (38 mph).

All of KANIWABA's pedal kits allow you to easily change between cranks and pegs in 5 minutes. YOU decide which one you want!

Use this video to install your power kit if it is an Add-on to your existing kit. If you are installing your Power Pedal Kit, please see Pedal Kit V2.0 installation video and then this one. Thanks!

New! Power Pedal Kit! It propels your bike. Power Kit sold separately also

www.kaniwaba.com Instructions to install your KANIWABA 127 mm Cranks.

www.kaniwaba.com Instructions on how to remove your KANIWABA Cranks.

This what some of our customers say after trying our kits! www.kaniwaba.com

Instructions to install your KANIWABA Pedal Kit V2.0

Carefully designed Pedal Kit for the SurRon.   What YOU get: A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Cranks.  Aluminum alloy, length 152 mm, black matte finish, JIS square taper. Pedals.  Flat nylon fiber pedals. Dimensions (L x W x H) 10.9 mm x 11.2 mm x 20 mm Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.  This pedal kit will not propel your ebike. Easy setup.  Adjust the kit to your bike using the stainless steel collars.  You may easily change between pedals or footpegs (and you have two footpeg positions!).  Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free.  New design is maintenance free since it has sealed cartridge bearings. Brace bar.  Also works as a brace bar Reduced wobble.  Little to no wobble of the chain, a common problem with the OEM kit since it is not connected to the chain. Aluminium made in order to reduce weight.  With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit.  The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel.  It will last a long time.

A carefully engineered pedal kit for your Sur Ron. Lets your rear suspension work and very easy setup. Since the original pedal kit is placed directly on the swing arm, it doesn't spring your weight! www.kaniwaba.com What YOU get: A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately. Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.  This pedal kit will not propel your ebike. Easy setup.  You may easily change between pedals or footpegs (and you have two footpeg positions!).  Just install the footpegs or the cranks without removing the pedal kit, You choose! Maintenance free.  New design is maintenance free since it has sealed cartridge bearings. Cranksets compatible.  This kit is compatible with most square tapered cranksets, no major crank offset is required. Brace bar.  Also works as a brace bar Reduced wobble.  Little to no wobble of the chain, a common problem with the OEM kit since it is not connected to the chain. Aluminum made in order to reduce weight.  With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit.  The spindle is made of steel. Durable Materials. Parts made of aluminum, hardware of stainless steel and spindle in blued steel.    Cranks and pedals not included in this version.

A carefully engineered pedal kit for your Sur Ron. Lets your rear suspension work and very easy setup. Since the original pedal kit is placed directly on the swing arm, it doesn't spring your weight! www.kaniwaba.com